There is room for a ROTEX A1, even in the smallest house
Installation options are virtually endless because none of the ROTEX A1 condensing boilers has a flue. It only requires a thin plastic flue gas pipe and can be operated independently of ambient air. Simply install the ROTEX A1 condensing boiler under the roof and you will gain space for your hobbies.
ROTEX A1 - Ideal for replacing boilers in existing systems
The ROTEX A1 is eminently suitable for replacing your older boiler. Its considerable flexibility when incorporating existing systems, its light weight with the smallest of dimensions and the easy sanitation of the flue system make it a specialist here. With the ROTEX A1 you save on heating costs and protect the environment - without sacrificing maximum heating and hot water comfort.
Incidently, heating oil can also be stored in the heating room:
Turn the room you have so far used for storing heating oil into something else, e.g. a hobby room, a sauna or similar. In combination with the double-skinned safety tank ROTEX variosafe, the oil can simply be stored next to the boiler. Furthermore, no walling off or oil collection tank is required. Building regulations (German State Fire Codes) permit the storage of up to 5000 litres of heating oil in the installation room. It must be ensured that there is a minimum distance between the boiler and the safety tank of 1 m if no radiation protection is available.
The plastic lining of the ROTEX A1 condensing oil boiler acts
as radiation protection and the temperature does not exceed 40°C at any point. This has been confirmed by a TÜV report. As a result, a minimum distance of 10 cm between the oil tank and the A1 boiler is sufficient.
For handling purposes, we recommend a distance of at least 40 cm.
Heating room and storage room in one
ROTEX A1 and two ROTEX variosafe 1000 l tanks, space required: 3.7 m2